Issue |
SHS Web Conf.
Volume 189, 2024
The 2nd International Conference on Ergonomics Safety, and Health (ICESH) and the 7th Ergo-Camp (ICESH & Ergo-Camp 2023)
|
|
---|---|---|
Article Number | 01033 | |
Number of page(s) | 15 | |
DOI | https://doi.org/10.1051/shsconf/202418901033 | |
Published online | 09 April 2024 |
Analysis Of Occupational Safety And Health (OSH) Application Of Assessment And Hazard Risk Control In The Mie Soon Industry Center Of Manjung Village, Klaten
Faculty of Engineering, Industrial Engineering Department, Muhammadiyah University of Surakarta, Surakarta, Indonesia
* Corresponding author: ma228@ums.ac.id
Sentra Industri Mie Soon Desa Manjung is one of the Mie Soon processing and trading businesses located in Desa Manjung, Ngawen, Klaten. The research was conducted on 10 UMKMs under the auspices of the Adi Mulyo Cooperative. Some of these Mie Soon processing businesses still use manual labour and as well as a lack of awareness among workers regarding the implementation of Occupational Safety and Health (K3). Other backgrounds include lack of awareness about Personal Protective Equipment (PPE), lack of lighting in the packaging room, manual removal of sacks of palm flour and firewood, repetitive movement activities for long periods, hands pierced by nails and zinc edges, itchiness due to chlorine, chlorine explodes, odor sting washing waste and so forth. This study aims to assess the previous application of K3 and control potential hazards in reducing work accidents. Based on the conducted assessment of OSH using WISE, it can be concluded that the implementation of OSH in UMKM Mie Soon Desa Manjung is not optimal. The results of the recapitulation and calculation of UMKM J which has the largest percentage of 11%, suggested immediate action. The results of RRN calculations using the SWIFT method identified 7 risks divided into one of the main priority, four of the medium priority, three of the low priority, and one of the lowest priority. Therefore, an improvement of UMKM working activities, especially those in main priority, needs to be seized. These working activities are composed of posture load, operator error, exposure to sharp and hot materials, manual handling, and chemicals.
© The Authors, published by EDP Sciences, 2024
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.