| Issue |
SHS Web of Conferences
Volume 4, 2014
ICITCE 2013 – International Conference on Information Technology and Career Education
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 4 | |
| Section | Information Technology | |
| DOI | https://doi.org/10.1051/shsconf/20140401005 | |
| Published online | 07 February 2014 | |
Characteristics of Speed Line Cutter and Fringe Analysis of Workpiece Surface
Shenyang Aerospace University, Shenyang Liaoning 110136
Easy to operate, speed line cutter has a high machining cost performance, so is very popular among the majority of users. The precision of guide rails, screws and nuts used in most of the machines is not high, and the machine control cannot compensate for the screw pitch error, clearance during the transmission and machining error due to electrode wear. Furthermore, control signal may also be lost in control process. The development of speed line cutter focuses on the quality and machining stability of CNC speed line cutter. This article makes an analysis about the impact of machine’s inherent characteristics on machining workpiece surface, and concludes that analysis shall be made on the irregular fringe, therefore to heighten the machining precision.
Key words: speed line / multiple cutting / precision / fringe
© Owned by the authors, published by EDP Sciences, 2014
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 2.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.