| Issue |
SHS Web of Conf.
Volume 44, 2018
IV International Scientific Conference “The Convergence of Digital and Physical Worlds: Technological, Economic and Social Challenges” (CC-TESC2018)
|
|
|---|---|---|
| Article Number | 00059 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/shsconf/20184400059 | |
| Published online | 05 June 2018 | |
A processing center for using digital hybrid technologies
National Technological Initiatives Center “New Industrial Technologies” of Peter the Great St. Petersburg Polytechnic University”, 195251, Polytechnicheskaya st., 29, Russian Federation
* Corresponding author: dmasaylo@gmail.com
The role of additive technologies in industrial development was highlighted, in particular, for implementation of the concept “Industry 4.0”. We discussed their significance for digital manufacturing of parts having complex configuration with internal cavities and functionally gradient properties. We analyzed the main drawbacks of additive technologies and suggested the ways to overcome them. We described the problem in creating the equipment for hybrid technologies on the basis of a processing center and an industrial robot. We developed a concept for creating a Russian-made machine-tool for using hybrid technologies. Solutions are proposed for improving the structure of the material of parts.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.