SHS Web Conf.
Volume 57, 2018The 10th Jubilee Scientific Conference – InfoGlob 2018
|Number of page(s)||10|
|Section||Ecological Aspects of Sustainable Development|
|Published online||26 November 2018|
Uncertainty of PM10 concentration measurement on the example of an optical measuring device
Gdynia Maritime University, Faculty of Entrepreneurship and Quality Science, 83 Morska St., 81-225 Gdynia, Poland
2 Warsaw University of Technology, Faculty of Building Services, Hydro and Environmental Engineering, 20 Nowowiejska St., 00-653 Warsaw, Poland
* Corresponding author: email@example.com
The interest in the natural environment, in particular the ambient air, has been growing. For this reason, growing interest in measuring of concentration of pollutants in the air. To the reduction of costs and time of obtained results, increasingly are used non-reference, alternative methods and devices. However, it is necessary to ensure equivalence of results obtained by alternative methods with the results of the reference method.
One of the equivalence issues is the assessment of the measurements uncertainty of the alternative method in relation to the reference method. This uncertainty is understood as the probability of obtaining a measurement result which differs from the real (reference) result by a predetermined value. Uncertainty can be caused by many reasons: imperfect implementation of the definition of the measurand, incomplete knowledge of the influence of external factors, heterogeneity of the analyzed phenomenon, errors of the measuring device and others. The paper presents methods for testing the uncertainty of measurements used in the study of equivalence and also proposed extending the test procedure with equivalence models, different from the linear regression models.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.