Analysis of Employee Work Posture and Physical Workload Using del Riesgo Individual Evalution and Cardio-Vascular Load Methods

Open Access

Issue		SHS Web Conf. Volume 189, 2024 The 2^nd International Conference on Ergonomics Safety, and Health (ICESH) and the 7^th Ergo-Camp (ICESH & Ergo-Camp 2023)


Article Number		01032
Number of page(s)		9
DOI		https://doi.org/10.1051/shsconf/202418901032
Published online		09 April 2024

A.A. Saputra, Wahyudin and A.E. Nugraha, “Evaluasi Aktivitas Manual Material Handling Dengan Menggunakan Metode Biomekanika Kerja Pada Pengangkatan Thiner di Bagian Warehouse,” Jurnal Sistem Teknik Industri, 23 (2), pp. 233–244, 2021. doi:10.32734/jsti.v23i2.6273. [CrossRef] [Google Scholar]
C. Brandl, O. Brunner, P. Marzaroli, T. Hellig, L. Johnen, A. Mertens, M. Tarabini, and V. Nitsch, “Using real-time feedback of L5/S1 compression force based on markerless optical motion capture to improve the lifting technique in manual materials handling,” International Journal of Industrial Ergonomics, 91(August), p. 103350, 2022. doi:10.1016/j.ergon.2022.103350. [CrossRef] [Google Scholar]
A. H. Burhanudin and I. Pratiwi, “Analisis Postur Kerja Pekerja Menggunakan Metode Evaluacion Del Riesgo Individual (ERIN) Dan Rapid Upper Limb Assessment (RULA) Untuk Meminimalkan Resiko MMH”. 2022. Available at: http://eprints.ums.ac.id/id/eprint/99825. [Google Scholar]
N. A. Hidayati, S. Wijaya, and A. H. Z. Fasya,“Postur Kerja Aktivitas Manual Material Handling Pada Pekerja Industri Berdasarkan Metode RULA”, National Conference for Ummah, pp. 2–6, 2020. [Google Scholar]
Armijal, D. Wahyuni, and M. Tambunan, “Usulan Perancangan Alat Bantu Untuk Mengurangi Risiko Cedera Musculoskeletal Pada Pekerja Di CV. XYZ”, Jurnal Sistem Teknik Industri, 20(1), pp. 1–9, 2018. doi:10.32734/jsti.v20i1.377. [CrossRef] [Google Scholar]
A. J. Nurzaman, D. Herwanto, and Wahyudin, “A Analisis Postur Kerja Untuk Mengurangi Risiko Muskulokeletal Menggunakan Metode REBA Pada Operator Produksi Di PT XYZ”, Tekinfo: Jurnal Ilmiah Teknik Industri dan Informasi, 9(1), pp. 69–81, 2021. doi:10.31001/tekinfo.v9i1.910. [CrossRef] [Google Scholar]
R. H. Nasution, “Evaluasi Postur Kerja Pada UMKM Sepatu Dengan Metode Repaid Entire Body Assesment”, Jurnal Simetri Rekayasa, 5035, pp. 72–75, 2020. [Google Scholar]
J. J. Ryoo, K. S. Lee, and J. W. Koo, “A Taxonomy of the Common Tasks and the Development of a Risk Index for Physical Load Assessment in Nursing Job”, Safety and Health at Work, 11(3), pp. 335–346, 2020. doi:10.1016/j.shaw.2020.05.004. [CrossRef] [Google Scholar]
Budianto, E. A. Prasetio, and H. K. Nurtjahyo, “Perbaikan Postur Kerja Aktivitas Manual Material Handling Industri Kecil Tahu Dengan Metode Ovako Work Posture Analysis System (OWAS)”, Jurnal Baut dan Manufaktur, 2(1), p. 1, 2020. [Google Scholar]
K.J. Tetiray, “Hubungan Antara Dukungan Orang Tua dan Tingkat Stres Anak Terhadap Belajar Online di SD Inpres’, Jurnal Ilmiah Mahasiswa & Penelitian Keperawatan, 2(1), 35–40, 2022. DOI:https://doi.org/10.35892/jimpk.v2i1.734. [Google Scholar]
E. Muslimah, S. Nandhiroh, L.A. Akriyanto, “Evaluasi Beban Kerja Fisik Dan Mental Pengemudi Bus Akdp Rute Solo-Semarang”, Prosiding Seminar Nasional IENACO – 2015, ISSN 2337-4349, 172-178, 2015. [Google Scholar]
Y. Rodríguez, S. Viña, and R. Montero, “ERIN: A practical tool for assessing workrelated musculoskeletal disorders”, Occupational Ergonomics, 11(2–3), pp. 59–73, 2013. doi:10.3233/OER-130210. [CrossRef] [Google Scholar]
M. V. Putri, “Penerapan Metode Cardiovascular Load (CVL) Dalam Analisis Beban Kerja Operator”, Jurnal Pendidikan Teknologi Informasi dan Vokasional, 2(2), pp. 9–25, 2019. doi: 10.23960/24900 [Google Scholar]
Jasri, H. (2016) ‘Analisa Beban Kerja Fisik Operator pada Stasiun Packing melalui Pendekatan Work Sampling’, Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 2(1), p. 9. doi:10.24014/jti.v2i1.6429. [CrossRef] [Google Scholar]
A.Z. Al Faritsy, and Y.A. Nugroho, “Pengukuran Lingkungan Kerja Fisik dan Operator Untuk Menentukan Waktu Istirahat Kerja” Jurnal Ilmiah Teknik Industri, 16(2), 108–114, 2017. [CrossRef] [Google Scholar]
R. Y. Ruiz, and J. J. H. Rico, ‘Confiabilidad ínter-observador del método de Evaluación de Riesgo Individual’, Revista Hacia la Promoción de la Salud, 18(1), pp. 41–56, 2013. [Google Scholar]
D.P. Andriani, and Sugiyono, “Penjadwalan Waktu Istirahat Optimal Untuk Mengurangi Risiko Musculoskeletal Disorders Berdasarkan OCRA Index.” Jurnal Ilmiah Teknik Industri, 15(2), 157–167, 2016. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.